Automotive-Grade HSBridge USB Type C Cable – RHT-605-20851
Product Specification
| 1st Connector | USB 3.1 Type-C |
||
|---|---|---|---|
| 2nd Connector | USB 3.1 Type-C |
||
| 1st Contact Type | Male Pin |
||
| 2nd Contact Type | Male Pin |
||
| Cable Type | Automotive High-Speed USB Cable |
||
| Impedance | 100 ohm |
||
| Frequency Range | DC ~ 6 GHz |
||
| Temperature Range | -40°C to +105°C |
||
| Insulation Resistance | 100V/DC, 20 MΩ, Min For 10ms |
||
| 1st Connector | USB 3.1 Type-C |
2nd Connector | USB 3.1 Type-C |
| 1st Contact Type | Male Pin |
2nd Contact Type | Male Pin |
| Cable Type | Automotive High-Speed USB Cable |
Impedance | 100 ohm |
| Frequency Range | DC ~ 6 GHz |
Temperature Range | -40°C to +105°C |
| Insulation Resistance | 100V/DC, 20 MΩ, Min For 10ms |
| Length | Customized |
|---|---|
| Length | Customized |
| 1st Connector | USB 3.1 Type-C |
|---|---|
| 2nd Connector | USB 3.1 Type-C |
| 1st Contact Type | Male Pin |
| 2nd Contact Type | Male Pin |
| Cable Type | Automotive High-Speed USB Cable |
| Length | Customized |
| Impedance | 100 ohm |
| Frequency Range | DC ~ 6 GHz |
| Temperature Range | -40°C to +105°C |
| Insulation Resistance | 100V/DC, 20 MΩ, Min For 10ms |
Designed to connect compatible in-vehicle electronic devices through an automotive-grade HSBridge USB Type-C interface and a USB Type-C connector.
With a nominal impedance of 100 ohms and a specified frequency range of DC to 6 GHz, this cable assembly is intended for automotive high-speed connectivity applications. Cable length and assembly configuration can be customized according to project requirements, subject to technical review and interface compatibility.
Key Features
- Automotive HSBridge Interface: Designed for compatible automotive USB Type-C interconnection requirements.
- Controlled-Impedance Design: Specified at 100 ohms for high-speed signal transmission applications.
- Configurable Cable Length: Customized lengths available to accommodate different installation and routing requirements.
Typical Applications
- In-vehicle infotainment and smart cockpit systems
- Automotive camera and video connectivity
- ADAS development and diagnostic equipment
- In-vehicle data communication and testing systems
- Automotive electronics integration and validation
Custom Cable Assembly Solutions
Renhotec supports OEM and ODM cable assembly projects requiring specific connector interfaces, cable lengths, and wiring configurations. Our team can review customer drawings, connector part numbers, pin assignments, and application requirements to evaluate the proposed assembly.
For customized HSBridge USB Type-C cable projects, please provide the target device interfaces, required cable length, expected operating conditions, and any applicable electrical performance requirements.
