RF Series
  • BNC Type
  • DIN 1.0/2.3
  • DIN 1.6/5.6
  • DIN 4.3/10
  • DIN 7/16
  • F Type
  • Fakra
  • HSD
  • MCX Type
  • MMCX Type
  • N Type
  • PAL Type
  • QMA Type
  • SMA Type
  • SMB Type
  • SMZ Type
  • SSMA Type
  • SSMB Type
  • TNC Type
  • TS9 Type
  • UHF Type
  • SMP Type
Connector Type
  • Jack
  • Plug
  • M12 1 Plug + 2 Jack
  • M12 1 Plug + 3 Jack
  • M12 1 Plug + 5 Jack
  • Casing
  • QSFP28 to QSFP28
  • QSFP56 to QSFP56
  • QSFPDD to QSFPDD
  • Receptacle
Contact Type
  • Female Pin
  • Male Pin
Orientation
  • Right Angle
  • Straight
  • T Type
Pins
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 12
  • 14
  • 19
  • 24
  • 32
Impedance
  • 100 ohm
  • 50 ohm
  • 75 ohm
  • 50 Ω
  • 50 Ω
  • 50Ω
Mounting Type
  • Cable Mount
  • Panel Mount
  • Cable Type
Mounting Feature
  • 2 Hole Flange
  • 4 Hole Flange
  • Bulkhead
  • Edge Mount
  • Offset Type
  • SMT
  • Through Hole
  • -
  • Flange
Fastening Type
  • 1/4-36 Threaded
  • 3/8-32 Threaded
  • 5/8-24 Threaded
  • Bayonet
  • Push-On
  • Push-Pull
  • Snap On
  • Threaded

SSMA Connector

The SSMA connector is essentially a smaller version of the SMA. It was originally designed for use with 0.085 semi-rigid cables. The male contacts are designed to be the same size as the cable conductor. Therefore it can be used as a matching pin for optimized VSWR.
SSMA connectors are available for semi-rigid and ultra-flexible coaxial cables for use over 26 GHz. The series was originally designed for 0.085 semi-rigid, with the male contact having the same diameter as the cable’s center conductor. This allows the cable’s center conductor to be used as a matching pin when needed to optimize VSWR.
SSMA connectors can also be used as panel mount, bulkhead mount, stripped and microstrip interaction, printed circuit board mount, and sealed connectors. This wide selection and the availability of intra-series and inter-series adapters provide users with complete design flexibility.

Connector Type: Jack
Contact Material: Phosphor Bronze
Contact Type: Female Pin
Fastening Type: Threaded
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Solder
Connector Type: Plug
Contact Material: Phosphor Bronze
Contact Type: Male Pin
Fastening Type: Threaded
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Solder
Connector Type: Jack
Contact Material: Phosphor Bronze
Contact Type: Female Pin
Fastening Type: Threaded
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Connector Type: Jack
Contact Material: Phosphor Bronze
Contact Type: Female Pin
Fastening Type: Threaded
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Solder
Connector Type: Plug
Contact Material: Phosphor Bronze
Contact Type: Male Pin
Fastening Type: Threaded
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Crimp