RF Series
  • BNC Type
  • DIN 1.0/2.3
  • DIN 1.6/5.6
  • DIN 4.3/10
  • DIN 7/16
  • F Type
  • Fakra
  • HSD
  • MCX Type
  • MMCX Type
  • N Type
  • PAL Type
  • QMA Type
  • SMA Type
  • SMB Type
  • SMZ Type
  • SSMA Type
  • SSMB Type
  • TNC Type
  • TS9 Type
  • UHF Type
  • 1.0mm
  • 1.85mm
  • 2.4mm
  • 2.92mm
  • 3.5mm
  • BMA
  • SMP
  • SMP Type
  • SSMP Type
Connector Type
  • Jack
  • Plug
  • M12 1 Plug + 2 Jack
  • M12 1 Plug + 3 Jack
  • M12 1 Plug + 5 Jack
  • Casing
  • QSFP28 to QSFP28
  • QSFP56 to QSFP56
  • QSFPDD to QSFPDD
  • Receptacle
Contact Type
  • Female Pin
  • Male Pin
  • Female
  • Male
Orientation
  • Right Angle
  • Straight
  • T Type
Pins
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 12
  • 14
  • 19
  • 24
  • 32
Impedance
  • 100 ohm
  • 50 ohm
  • 75 ohm
  • 50 Ω
  • 50 Ω
  • 50Ω
  • 75Ω
Mounting Type
  • Cable Mount
  • Panel Mount
  • Cable Type
Mounting Feature
  • 2 Hole Flange
  • 4 Hole Flange
  • Bulkhead
  • Edge Mount
  • Offset Type
  • SMT
  • Through Hole
  • -
  • Flange
Fastening Type
  • 1/4-36 Threaded
  • 3/8-32 Threaded
  • 5/8-24 Threaded
  • Bayonet
  • Push-On
  • Push-Pull
  • Snap On
  • Threaded

DIN 7/16 Connector

7-16 DIN connectors are mechanically very robust coaxial connectors with screw locks. They have a characteristic impedance of 50 and are suitable for excellent electrical performance up to 7.5 GHz. The 7/16 connector RF DIN type is designed for medium to high power transmission in transmitting stations, while low loss transmission of received signals such as cellular base stations is a typical application. Low intermodulation products and waterproof types are also available.

7-16 DIN is a high-power RF connector widely used in antenna systems. Or base stations that supply better performances concerning interference and intermodulation rejection. The inner contact on the 7-16 DIN connector measures 7 mm while the outer contact on the connector measures 16 mm.