Automotive RF, data, and signal interconnects
Automotive RF & High-Speed Connectivity Solutions
Modern vehicle platforms depend on stable RF links, compact high-speed data paths, and reliable cable assemblies across cameras, antennas, displays, telematics modules, diagnostic systems, and vehicle networks.
FAKRA / Mini FAKRA / HSDAutomotive EthernetRF cable assembliesDrawings & RFQ support
Find Products By Vehicle Application
Start from the system you are designing
Choose the vehicle application first, then review the connector and cable families commonly used in that signal path.
01
ADAS & Camera Systems
High-speed data, compact routing, stable shielding, camera and sensor links.
View application02
Telematics, GNSS & V2X
Antenna-to-module RF links, cellular/GNSS paths, and cable assembly customization.
View application03
Smart Cockpit & Infotainment
Display, audio, control, and in-cabin data connections in space-constrained layouts.
View application04
EV Signal, Diagnostics & Communication
Low-voltage communication, monitoring, diagnostics, and data links around EV subsystems.
View application05
In-Vehicle Ethernet & Zonal Networks
Reliable data links between ECUs, gateways, cameras, sensors, and control modules.
View applicationAutomotive Connectivity Challenges
Small interconnects can create large system risks
Vehicle electronics are becoming denser, faster, and more distributed. Connector and cable assembly decisions affect signal loss, EMI behavior, routing space, qualification timing, and field reliability.
01
High-Speed Signal Integrity
ADAS cameras, displays, telematics modules, and vehicle networks require controlled impedance, suitable shielding, and appropriate cable construction.
- Data rate or frequency range
- Impedance
- Cable type and length
- Shielding requirement
02
Compact Harness Design
More sensors and modules are installed into limited space, making connector profile, bend radius, and routing constraints critical.
- Connector profile
- Cable outside diameter
- Right-angle or straight orientation
- Assembly length
03
EMI, Vibration & Environment
Automotive signal paths may face vibration, temperature changes, electrical noise, and demanding installation conditions.
- Shielding design
- Locking or mating interface
- Cable jacket material
- Environmental requirement
04
Part Matching & Lead Time
Many projects require a specific connector code, mating interface, cable length, or cross-reference part number.
- SKU or reference number
- Connector A / connector B
- Cable type
- Quantity and application
Application Matrix
Automotive applications and product families
Use this matrix as a first-pass selection guide before moving to category pages or RFQ review.
| Application | Connection Need | Recommended Product Families | Why It Fits |
|---|---|---|---|
| ADAS camera and sensor links | High-speed video/data transmission, compact routing, stable shielding | HSD, Mini FAKRA, FAKRA, automotive Ethernet cable assemblies | Supports camera, sensor, and module-level data paths with connector and assembly options. |
| Telematics and GNSS modules | Antenna-to-module RF connection, cellular/GNSS/Wi-Fi related RF paths | FAKRA, SMA, N Type, RF cable assemblies | Common RF connector families for antenna and communication module connections. |
| Smart cockpit and infotainment | Display, audio, control, and in-cabin data connections | HSD, Mini FAKRA, MCX, MMCX, SMP, automotive Ethernet | Compact connector choices for dense cabin electronics. |
| EV communication and diagnostics | Low-voltage signal, data, monitoring, and diagnostic links | Automotive Ethernet, HSD, FAKRA, SMA, diagnostic cable assemblies | Supports communication and monitoring paths; not positioned as high-voltage power connection. |
| In-vehicle Ethernet and zonal architecture | ECU, gateway, sensor, and module data links | Automotive Ethernet cable assemblies, HSD, data connectivity products | Supports distributed vehicle electronics and high-speed data routing. |
ADAS & Camera Systems
High-speed interconnects for camera and sensor links
ADAS and camera systems rely on real-time data from cameras, radar modules, sensors, and control units. Cable assembly quality, shielding, connector fit, and routing space can affect signal stability and system integration.
- Front, rear, and surround-view camera systems
- Radar and sensor module connections
- Parking assistance systems
- Camera-to-ECU data links
Telematics, GNSS & V2X
RF links for connected vehicle modules
Connected vehicle systems depend on reliable RF and data links between antennas, telematics control units, GNSS modules, cellular modules, Wi-Fi/Bluetooth modules, and vehicle networks.
- GNSS antenna connections
- LTE/5G telematics modules
- Fleet management devices
- V2X communication units
Smart Cockpit & Infotainment
Compact links for dense cabin electronics
Smart cockpit systems integrate displays, cameras, audio modules, touch interfaces, connectivity modules, and control electronics in limited cabin space.
- Central information displays
- Rear-seat entertainment systems
- Head-up display modules
- Cabin camera systems
EV Signal, Diagnostics & Communication
Low-voltage signal and diagnostic connectivity
Electric vehicle platforms require many low-voltage signal, communication, monitoring, and diagnostic connections around battery management, charging communication, vehicle control, and service interfaces.
This RF site focuses on signal, data, communication, and diagnostic interconnects rather than high-voltage EV power connectors.
- Battery management communication links
- Charging communication modules
- Vehicle diagnostics and service tools
- Energy monitoring signal paths
In-Vehicle Ethernet & Zonal Networks
Data links between ECUs, gateways and modules
As vehicle electronics move toward centralized compute, gateways, and zonal architectures, data links between ECUs, sensors, cameras, and control modules become more important.
- ECU and gateway connections
- Camera and sensor data links
- Zonal controller networks
- Module-to-module communication
Featured Product Families
Start with the product family, then confirm the exact assembly
Browse product families below, or send your existing part number, connector interface, cable type, and application requirements for a custom recommendation.
FAKRA Connectors & Cable Assemblies
Commonly used for automotive antenna, telematics, GNSS, infotainment, and RF module connections.
Mini FAKRA Products
Compact, high-density automotive RF and data connection options where space and routing efficiency matter.
HSD Connectors & Cable Assemblies
Used in vehicle data applications such as cameras, displays, infotainment systems, and module connections.
Automotive Ethernet Cable Assemblies
Support vehicle data communication between ECUs, sensors, cameras, gateways, and control modules.
Engineering Support
Support for custom automotive cable assemblies
Automotive electronics projects often require more than a standard connector category. Cable length, connector orientation, mating interface, shielding, jacket material, quantity, and drawing requirements can all affect the right recommendation.
- Application or vehicle system
- Connector A and connector B
- Cable type or target impedance
- Cable length and tolerance
- Frequency range or data-rate requirement
- Existing SKU, drawing, or reference part number
Automotive RFQ
Need help selecting an automotive connector or cable assembly?
Send your application, connector interface, cable length, impedance, frequency or data-rate requirement, and target quantity. For part-number matching, include the SKU, drawing, or reference number in your inquiry.
Resources & FAQ
Information buyers usually need before RFQ
Use product pages and RFQ support to request drawings, datasheets, compliance files, and custom assembly review.
Product Datasheets
Review connector interfaces, electrical specifications, dimensions, and configurations where files are available.
Drawings & Product Files
Check product drawings and related files on PDPs, or request files during project review.
Compliance Documents
Request available RoHS, REACH, or material-related files for the selected product family.
Product Catalogs
Browse automotive, RF connector, cable assembly, and high-speed data product families.
What automotive connector families does Renhotec supply?
Renhotec supplies FAKRA, Mini FAKRA, HSD, automotive Ethernet cable assemblies, SMA, N Type, MCX, MMCX, SMP, and related RF cable assembly options for vehicle electronics applications.
Can Renhotec support custom automotive cable assemblies?
Yes. Renhotec can support custom cable assembly requirements such as connector combination, cable type, length, orientation, shielding, and application-specific configuration review.
Which products are suitable for ADAS camera systems?
ADAS camera and sensor systems commonly use HSD cable assemblies, Mini FAKRA products, FAKRA products, and automotive Ethernet cable assemblies depending on the signal type, layout, and data requirement.
Which products are suitable for telematics and GNSS modules?
Telematics and GNSS applications commonly use FAKRA, SMA, N Type, and RF cable assemblies for antenna-to-module connections. Automotive Ethernet may also be used for related vehicle data communication paths.
Does Renhotec provide high-voltage EV charging connectors?
This RF site focuses on RF, high-speed data, antenna, signal, communication, and diagnostic connectivity. For EV applications, the recommended scope is low-voltage communication, monitoring, diagnostics, and data interconnects rather than high-voltage power charging connections.
What information should I provide for a fast RFQ?
Please provide connector type, connector gender, cable type, cable length, impedance, frequency or data-rate requirement, environmental requirement, target quantity, and any existing SKU, drawing, or reference part number.