SFP+-10G-ZR, 10G SFP+ 850nm 300m DOM Duplex LC SMF Optical Transceiver Module
- Supports data rates of up to 10 Gbps
- Compatible with a wide range of networking equipment
- Hot-pluggable for easy installation and removal
- Low power consumption for reduced energy costs
- Supports digital diagnostic monitoring (DDM) for real-time performance monitoring
- Can transmit up to 300 meters over multimode fiber and up to 10 kilometers over single-mode fiber
Renhotec SFP+ 10Gb Modules
Renhotec 10Gb SFP+ modules are high-speed, hot-pluggable optical transceivers designed for 10 Gigabit Ethernet and other high-speed networking applications. They support data rates up to 10Gbps and can operate over a range of distances depending on the specific module. Renhotec 10Gb SFP+ modules are compatible with a wide range of networking equipment and are easy to install and replace, thanks to their hot-pluggable design. They are ideal for network administrators looking for a reliable and cost-effective solution for high-speed networking.
Connectivity Solution
Features
10G Connectivity & Low-Power
The Optical Transceiver provides fast and reliable 10G connectivity in data center environments. Its low power consumption feature makes it an energy-efficient option for large-scale data center environments, reducing power costs and minimizing environmental impact.
Strict Quality Control Requirements
Renhotec follows strict quality control requirements to ensure the reliable performance of its optical modules. By adhering to these requirements, they can provide high-quality products that meet the needs of their customers and provide reliable performance over an extended period.
Specifications
Compatible Brands | Cisco, Huawei, ZTE, HP |
---|---|
Form Factor | SFP+ |
Max Data Rate | 10Gbps |
Wavelength | 850nm |
Max Cable Distance | 300m |
Connector | Duplex LC |
DOM/DDM | Supported |
Mode | Multimode |
Transmitter Type | VCSEL |
Receiver Type | PIN |
TX Power | -5~-1dBm |
Receiver Sensitivity | <-11dBm |
Protocols | IEEE 802.3ae, SFP+ MSA |
Compatible Brands | Cisco, Huawei, ZTE, HP |
---|---|
Form Factor | SFP+ |
Max Data Rate | 10Gbps |
Wavelength | 850nm |
Max Cable Distance | 300m |
Connector | Duplex LC |
DOM/DDM | Supported |
Mode | Multimode |
Transmitter Type | VCSEL |
Receiver Type | PIN |
TX Power | -5~-1dBm |
Receiver Sensitivity | <-11dBm |
Protocols | IEEE 802.3ae, SFP+ MSA |
Renhotec Information
We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.
RF Connector Compatibility
Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.
We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.
Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.
Customization and Sample Testing
Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.
Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.
Yes, please advise the thread length for evaluation.
Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.
Yes, please share it and the requirement with us, our engineer team will evaluate it.
RF Connector Specifications
The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.
Order Lead Time
Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.
Shipping and Packaging
For small quantities, we ship by express. For larger quantities, we ship by sea, air, railway, or truck.
Our standard packaging methods include blister box/polybag with label in a carton box. We can also package as per request.
Payment Methods
Accepted payment methods include T/T, Paypal, etc.
Quality Assurance
Yes, we can provide regular inspection reports. If you have a special requirement, please let us know.
Yes, they conform. RoHS and REACH test reports are available.
Our products have 12 months’ warranty. It’s better to provide the feedback within one month after you receive the goods.
👋Request a quotation for bulk order?
You're in the right place! Fill out the form below and our dedicated team will provide you with a quote within a working day.