Category: NMEA 2000 Connectors

Nmea 2000 Mini Field Installable 7/8＂ Female Connector 5 Pin

Efficient: Multiple devices can be connected to efficient communication and data sharing between devices.
Flexibility: It can be easily expanded to add new devices and sensors as needed.
Reliability: Modern communication protocols and technologies are used to provide a high degree of reliability and stability.
Easy to install: Can be connected by simple plugs, making the installation process easier and faster.
Data standardization: Standardized data formats and protocols are used to ensure compatibility between different devices and accuracy of data exchange.
Low Power Consumption: Designed for low power consumption, it can operate effectively in resource-limited environments such as ships and boats.

NMEA 2000 is a plug-and-play communications protocol that makes it easy to integrate different devices on board. It provides a standardized way for devices to communicate with each other, so you can easily connect chartplotters, depth sounders, engine monitors and other devices to create a fully integrated shipboard system.
Key benefits of the NMEA 2000 include high data transfer rates that allow devices to exchange large amounts of data quickly and reliably. This is particularly useful for devices that require real-time data, such as GPS. The protocol also supports bi-directional communication, which is critical for devices that require feedback or control, such as autopilots or leveling devices.

NMEA 2000 Series

NMEA 2000 Connectors

This connector is typically a waterproof twist-lock type with a 5-pin configuration for easy installation and removal of equipment.

NMEA 2000 T-Type Cables

These cables utilize a T-type connector on one end, allowing for easy branching of the network to connect multiple devices. The cables are designed to be rugged and weatherproof for use in harsh marine environments. They are available at a variety of lengths to meet different installation requirements.

NMEA 2000 Trunk Cables

These cables, usually with a standard connector at each end, are the backbone of the NMEA 2000 network and form the main communication channel for data exchange. These cables are suitable for marine environments and are available in a variety of lengths.

NMEA 2000 Field Installation Connectors M12 & 7/8″

Establish connections between NMEA 2000 devices. These connectors are designed to withstand harsh environmental conditions and provide reliable data communications within the NMEA 2000 network.

NMEA 2000 Terminators

A NMEA 2000 terminator is a device used to terminate the two ends of a NMEA 2000 network. The terminator is a resistor that is placed at the end of the network to prevent signal reflections that can cause data errors.

Applications

Multi-function displays
Depth sounder and fish finder
Autopilot Systems
Wind Sensors
Compass Heading Sensors

Engine Monitoring
Fuel Flow Sensors
Tank Level Sensors
Oil Pressure and Temperature Sensors

AIS Transceivers
Radio equipment
GPS antennas
DSC Systems

Product Specification

Connector Type	Jack
Contact Type	Female Pin
Orientation	Straight
Number of Positions	5 Pin
Shell Material	PA66+GF
Ingress Protection	IP67
Fastening Type	Threaded
Conductor Material	Copper Alloy
Mounting Type	Cable Mount
Rated Current	9A
Rated Voltage	300V
Operating Temperature	-25°C～+80°C
Connector Type	Jack	Contact Type	Female Pin
Orientation	Straight	Number of Positions	5 Pin
Shell Material	PA66+GF	Ingress Protection	IP67
Fastening Type	Threaded	Conductor Material	Copper Alloy
Mounting Type	Cable Mount	Rated Current	9A
Rated Voltage	300V	Operating Temperature	-25°C～+80°C

Connector Type	Jack
Contact Type	Female Pin
Orientation	Straight
Number of Positions	5 Pin
Shell Material	PA66+GF
Ingress Protection	IP67
Fastening Type	Threaded
Conductor Material	Copper Alloy
Mounting Type	Cable Mount
Rated Current	9A
Rated Voltage	300V
Operating Temperature	-25°C～+80°C

Renhotec Information

Where is your factory located? Can I visit your factory?

We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.

RF Connector Compatibility

Does the connector comply with international standards and is it interchangeable with similar products of other brands?

Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.

Is this RF connector suitable for the PCB of our device?

We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.

Will this RF connector fit well with my existing connector interfaces and cables?

Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.

Customization and Sample Testing

Can Renhotec customize high frequency RF connector? Such as SMA 0-18G.

Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.

For RF PCB connector, can center pin dimension be customized according to my requirement?

Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.

Is the thread length can be customized? Such as SMA connector thread length.

Yes, please advise the thread length for evaluation.

Can you assembly cable base on our requirement?

Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.

Can you customize according to my datasheet/drawing?

Yes, please share it and the requirement with us, our engineer team will evaluate it.

RF Connector Specifications

What's the impedance of RF connector?

The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.

Order Lead Time

What is the lead time and availability of these connectors?

Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.