SMP Female to SMP Female Adapter
- Exquisite production technology
- Accurate signal transmission
- High-quality anti-corrosion
- Easy to install
OEM Compatibility & Manufacturer Part Number Reference
RenhotecRF RHT-628-2002 can be used as a compatible alternative for the following manufacturer part numbers after drawing and mating-interface verification.
| RenhotecRF Part No. | RHT-628-2002 |
| Micro Mode Part No. | MMSP-11318 |
Manufacturer names and part numbers are used for compatibility reference only. Final compatibility should be confirmed by drawing, key code, impedance, and mounting dimensions.
Product Specification
| Adapter Style | SMP to SMP |
||
|---|---|---|---|
| Convert From(Adapter 1) | SMP |
||
| 1st Connector | Jack |
||
| 1st Contact Type | Female Pin |
||
| Convert To(Adapter 2) | SMP |
||
| 2nd Connector | Jack |
||
| 2nd Contact Type | Female Pin |
||
| Impedance | 50 ohm |
||
| Orientation | Straight |
||
| Shell Material | Beryllium Copper |
||
| Shell Finish | Gold Plated |
||
| Contact Material | Beryllium Copper, Stainless Steel |
||
| Contact Finish | Gold Plated, Passivate |
||
| Frequency Range | 0-6GHz |
||
| VSWR | 1.3 MAX |
||
| Working Voltage | 335 V rms |
||
| Dielectric Withstanding Voltage | 500 V |
||
| Insulation Resistance | 5000MΩ Min |
||
| Temperature Range | -65°C to +165°C |
||
| Adapter Style | SMP to SMP |
Convert From(Adapter 1) | SMP |
| 1st Connector | Jack |
1st Contact Type | Female Pin |
| Convert To(Adapter 2) | SMP |
2nd Connector | Jack |
| 2nd Contact Type | Female Pin |
Impedance | 50 ohm |
| Orientation | Straight |
Shell Material | Beryllium Copper |
| Shell Finish | Gold Plated |
Contact Material | Beryllium Copper, Stainless Steel |
| Contact Finish | Gold Plated, Passivate |
Frequency Range | 0-6GHz |
| VSWR | 1.3 MAX |
Working Voltage | 335 V rms |
| Dielectric Withstanding Voltage | 500 V |
Insulation Resistance | 5000MΩ Min |
| Temperature Range | -65°C to +165°C |
| Insulator | PTFE |
||
|---|---|---|---|
| Sleeve Material | Stainless Steel |
||
| Sleeve Finish | Passivation Plating |
||
| Insertion Loss | 0.12*√F (GHz) dB |
||
| Insulator | PTFE |
Sleeve Material | Stainless Steel |
| Sleeve Finish | Passivation Plating |
Insertion Loss | 0.12*√F (GHz) dB |
| Adapter Style | SMP to SMP |
|---|---|
| Convert From(Adapter 1) | SMP |
| 1st Connector | Jack |
| 1st Contact Type | Female Pin |
| Convert To(Adapter 2) | SMP |
| 2nd Connector | Jack |
| 2nd Contact Type | Female Pin |
| Impedance | 50 ohm |
| Orientation | Straight |
| Shell Material | Beryllium Copper |
| Shell Finish | Gold Plated |
| Contact Material | Beryllium Copper, Stainless Steel |
| Contact Finish | Gold Plated, Passivate |
| Insulator | PTFE |
| Sleeve Material | Stainless Steel |
| Sleeve Finish | Passivation Plating |
| Bead Material | ULTEM |
| Bead Finish | Gold Plated |
| Frequency Range | 0-6GHz |
| VSWR | 1.3 MAX |
| Insertion Loss | 0.12*√F (GHz) dB |
| Working Voltage | 335 V rms |
| Dielectric Withstanding Voltage | 500 V |
| Insulation Resistance | 5000MΩ Min |
| Temperature Range | -65°C to +165°C |
RF adapters for changing gender or as connector protectors in precision test and measurement applications are commonly available.
They are also used to transfer signals between connector interfaces.
Coaxial adapters are available in 50 ohm and 75 ohm designs. Standard polarity and reverse polarity Jack to Jack, Plug to Jack, and Plug to Plug adapters are available across most RF interfaces.
The polarity of an interface can change by changing the center contact from male to female or from female to male, depending on the adapter interface.
RF Adapter Series
Industry Application
Drawing for SMP Female to SMP Female AdapterDownload
