TS9 Connector Right AnglePlug Crimp Type for RG316 Coaxial Cable – DS901MCS0002
- Can be used with RG188/316/174
- Crimp type connector
- Support the connection of an external antenna
- Attached to the PCB by a Surface Mount or End-Launch mounting
TS-9 (or TS9) is an uncommon RF coaxial connector found in cellular devices such as 3G and 4G mobile broadband modems to support the connection of an external antenna. The design and production of the TS-9 connector do not follow any defined international standard, nor does the design follow a proprietary specification.
The TS-9 Female connector comprises a very simple circular brass housing with an outer diameter of 3.5 mm. The connector is typically attached to the PCB by a Surface Mount or End-Launch mounting. The connector is most popularly found on wireless broadband devices manufactured by Netgear and Sierra Wireless.
TS-9 Male connectors have no controlled manufacture. However, they are identified by a 3.5 mm inner diameter and 3.8 mm outer diameter. The male connector is mostly found on interconnecting coaxial cables, although occasionally on small direct connecting external antennas.
Application Scenarios
Product Specification
RF Series | TS9 Type |
||
---|---|---|---|
Connector Type | Plug |
||
Orientation | Right Angle |
||
Contact Type | Male Pin |
||
Contact Termination Style | Solder Cup |
||
Shield Termination | Crimp |
||
Mounting Type | Cable Mount |
||
Fastening Type | Snap On |
||
Cable Type | RG316 |
||
Number of Ports | 1 |
||
Impedance | 50 ohm |
||
Frequency - Max | 4GHz |
||
Shell Material | Copper Alloy |
||
Shell Finish | Nickel Plated |
||
Insulator Material | PTFE |
||
Contact Material | Brass |
||
Contact Finish | Gold Plated |
||
RF Series | TS9 Type |
Connector Type | Plug |
Orientation | Right Angle |
Contact Type | Male Pin |
Contact Termination Style | Solder Cup |
Shield Termination | Crimp |
Mounting Type | Cable Mount |
Fastening Type | Snap On |
Cable Type | RG316 |
Number of Ports | 1 |
Impedance | 50 ohm |
Frequency - Max | 4GHz |
Shell Material | Copper Alloy |
Shell Finish | Nickel Plated |
Insulator Material | PTFE |
Contact Material | Brass |
Contact Finish | Gold Plated |
RF Series | TS9 Type |
---|---|
Connector Type | Plug |
Orientation | Right Angle |
Contact Type | Male Pin |
Contact Termination Style | Solder Cup |
Shield Termination | Crimp |
Mounting Type | Cable Mount |
Fastening Type | Snap On |
Cable Type | RG316 |
Number of Ports | 1 |
Impedance | 50 ohm |
Frequency - Max | 4GHz |
Shell Material | Copper Alloy |
Shell Finish | Nickel Plated |
Insulator Material | PTFE |
Contact Material | Brass |
Contact Finish | Gold Plated |
Renhotec Information
We have two factories, one is located in Dongguan city, another in Jiangmen city. Visitors are always welcome.
RF Connector Compatibility
Yes, our RF connector interface dimension conform international standards. Normally it’s interchangeable with similar products of other brands, it’s better to send us the datasheet/sample of other brands for check before order.
We recommend that you provide us with detailed specifications of your existing interfaces and cables, performance requirement and usage environment, so that our technical team can evaluate them.
Please advise your PCB layout dimension requirement, we’ll recommend you the most suitable Renhotec drawing for check.
Customization and Sample Testing
Yes, we offer customization services to meet your specific needs. Please provide your specification, performance requirement or drawing, photos, or samples for evaluation.
Yes, we provide customised services, it has MOQ requirement, please send your requirement for our engineer team evaluation.
Yes, please advise the thread length for evaluation.
Yes, we can. Please send us the datasheet or connector and cable requirement, we can produce as per request.
Yes, please share it and the requirement with us, our engineer team will evaluate it.
RF Connector Specifications
The impedance of an RF connector typically refers to the characteristic impedance of the transmission line it supports. The most common characteristic impedances for RF connectors are 50 ohms and 75 ohms. Please select an RF connector with the appropriate characteristic impedance to ensure optimal signal transmission and minimal signal loss within the system.
Order Lead Time
Lead time depends on the product type, quantity, and production status. For items ready in stock, the lead time is 3-5 working days. For common items, the lead time for 10K is 10-12 working days. The accurate lead time can be provided once the order is confirmed.
Shipping and Packaging
For small quantities, we ship by express. For larger quantities, we ship by sea, air, railway, or truck.
Our standard packaging methods include blister box/polybag with label in a carton box. We can also package as per request.
Payment Methods
Accepted payment methods include T/T, Paypal, etc.
Quality Assurance
Yes, we can provide regular inspection reports. If you have a special requirement, please let us know.
Yes, they conform. RoHS and REACH test reports are available.
Our products have 12 months’ warranty. It’s better to provide the feedback within one month after you receive the goods.
👋Let us know how we can help
We look forward to hearing from you! We will respond within 24 hours.