You are here:-news-

Introduction to the insertion and extraction force test process of the electronic connector

By | August 9th, 2019|Connector news|

The form and structure of the electronic connector are various, and various types of electronic connectors are available depending on [...]

What impact will the artificial intelligence have on the connector industry?

By | August 9th, 2019|Connector news|

AI is the abbreviation of Artificial Intelligence in English. It is a new technical science that studies and develops theories, [...]

How to improve the production efficiency of connectors and connecting wires

By | August 9th, 2019|Connector news|

For the manufacturing industry, how to improve the production efficiency of products is a problem that every enterprise is studying. [...]

Connector Manufacturers need to foucs on the plating process

By | August 9th, 2019|Connector news|

Electronic products are everywhere in our lives. With the improvement of people's living standards, nowadays, it is an era of [...]

How do I choose the best performing electrical connector for my device

By | June 29th, 2019|Connector news|

To choose the best performing electronic connector for your device, you should consider the type of device interface you are [...]

Three major factors that cause connector terminals to fail

By | June 29th, 2019|Connector news|

The terminal block is a metal piece disposed inside the connector insulation material, and its function is to guide the [...]

The connector PIN pin requires electroplating gold plating process

By | June 29th, 2019|Connector news|

The connector PIN pin is part of the important components of the connector. The primary function is to contact the [...]

Introduction of 5 kinds of outer cover materials commonly used in cables and electronic harnesses!

By | June 29th, 2019|Connector news|

Cables and electronic harnesses are often used in a variety of environments, and their outer cover materials provide additional insulation [...]

Key points in the design of modern medical connectors!

By | June 14th, 2019|Connector news|

Connectors are a small component in the ambitious design of medical devices, and some may think that connectors are a [...]

The importance of cable connectors for good sealing!

By | June 14th, 2019|Connector news|

In the harsh environment, the weakest problems in electronic systems are often exposed. From pocket-type consumer devices to complex military [...]